Related Manuals for DeLonghi JE850M
Summary of Contents for DeLonghi JE850M
- Page 1 Living innovation Juice Extractor JE850M Instruction Manual Read this instruction manual carefully before using this product.
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. Important Safeguards 2. Parts List 3. Special Helpful Hints for The Best Performance 4. Assembly 5. Disassembly 6. Additional Caution 7. How to Cleaning... -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS: When using this electrical appliance, basic safety precautions should always be followed including the following: Read all instructions before operating. To protect against risk of electrical shock do not put the motor housing in water or any other liquids. Close supervision is necessary when the appliance is used by or near children. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS: Always make sure juicer cover is clamped securely in place before motor is turned on. Do not unfasten clamps while juicer is in operation. Be sure to turn switch to OFF position after each use of your juicer. Make sure the motor stops completely before disassembling. -
Page 5: Parts List
PARTS LIST: Pusher Top Lid Locking Bar Receptacle Juice Cup Pulp Container Switch Motor Housing... -
Page 6: Special Helpful Hints For The Best Performance
SPECIAL HELPFUL HINTS FOR THE BEST PERFORMANCE: Do not put any fruit or vegetable in your juicer until power is turned on. Remove large seed from fruits such as peach, mango, etc. as the seed will damage the blade of the unit. -
Page 7: Assembly
ASSEMBLY: Step 1: Place receptacle on the motor housing,with juicer spout facing direction of locking bar. Step 2: Place filter inside receptacle, matching its bottom to the center peg connected with the motor housing. Step 3: Place top lid attached on top of the receptacle. -
Page 8: Assembly
ASSEMBLY: Step 5: Make sure locking bar is in the full upright. of the locked position otherwise the safety switch will not Step 6: Insert pusher into chute. Always use pusher to feed fruits and vegetables into unit. Step 7: Place pulp container and juice cup in their positions. -
Page 9: Disassembly
DISASSEMBLY: Important Notice:Before disassembling the unit make sure you turn the power OFF and unplug the machine from the electric outlet. Step 1: Remove the pusher from the chute, remove plup container and remove the juice cup. Step 2: Hold the top lid and pull the locking bar as shown. -
Page 10: Additional Caution
ADDITIONAL CAUTION: 1. Be careful, when cleaning the blade and teeth on the filter as these are very sharp. 2. You may put a plastic waste bag into the pulp container for easy cleaning. 3. Use filter brusher to clean the blade and teeth. -
Page 11: How To Cleaning
HOW TO CLEANING: Turn off the power switch and wait until the motor completely stops. With dry hands, unplug the power cord from electrical outlet. Disassemble the juicer as disassembly as per instructions on page #7 Clean all other parts except the motor housing, in warm, soapy water. - Page 12 Addendum to assembly instructions of JE850M STEP 7A OF ASSEMBLY JE850M IMPORTANT SAFETY FEATURE Male connector at base of pulp collection container must make positive connection with the microswitch inside the slot at the base of the motor housing before unit is able to be activated.
Need help?
Do you have a question about the JE850M and is the answer not in the manual?
Questions and answers