Using The Strap Holder - O2 Xda Guide User Manual

4 Getting Started

1.4 Using the Strap Holder

The strap holder at the bottom panel of your device allows you to attach a wrist
strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1. Remove the back cover.
2. Insert the loop of the strap,
lanyard or string accessory
through the small hole at the
bottom of the back cover.
3.
From the inner side of the back
cover, pull the loop and then
attach it over the strap holder's
t-shaped hook as shown on the
illustration at the right.
Tip
4.
Replace the back cover.
To attach the loop over the
t-shaped hook easier, push the
loop into the strap holder hole
using a pointed object such as
a needle.