Troubleshoot Sync Connection Problem; Synchronising Via Bluetooth - O2 Xda Guide User Manual

Troubleshoot sync connection problem

In some cases, when the computer connects to the Internet or a local network,
it may disconnect the connection with your device in favour of the Internet or
network connection.
If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the
Enable faster data synchronization check box. This makes your computer utilise a
serial USB connection with your device.

5.5 Synchronising via Bluetooth

You can connect and synchronise your device with the computer using Bluetooth.
Note
To connect and synchronise your device with a computer via Bluetooth, your
computer must have a built-in Bluetooth or installed with a Bluetooth adapter or
dongle.
To synchronise with a computer via Bluetooth
1. Set up Windows Mobile Device Center or ActiveSync on your computer to
synchronise through Bluetooth. See the program's Help for instructions.
2.
Make sure that Bluetooth on both your device and the computer are turned
on and set to visible mode. See "Bluetooth Modes" in Chapter 9 for details.
If this is the first time you have connected to this computer via Bluetooth,
you must first complete the Bluetooth wizard on your device and set
up a Bluetooth partnership between your device and the computer. For
more information about creating a Bluetooth partnership, see "Bluetooth
Partnerships" in Chapter 9.
3. On your device, tap Start > Programs > ActiveSync.
4. Tap Menu > Connect via Bluetooth.
Note
To conserve battery power, turn off Bluetooth when not in use.
Synchronising Information With Your Computer 107