Table of Contents
Advertisement
Installation Overview (Oracle
Solaris 10)
Follow these steps to install the Adapter on an Oracle Solaris 10 platform.
Step Description
1.
Understand the Adapter.
2.
Verify the driver installation.
3.
Install the Adapter.
4.
Verify the Adapter installation.
5.
Configure the network.
6.
Configure the driver parameters.
7.
(Optional) Boot over the network.
8.
(Optional) Install the OS over the network.
9.
(Optional) Configure jumbo frames.
10.
(Optional) Configure link aggregation.
11.
(Optional) Configure VLANs.
2
Sun Dual Port 10GBase-T Adapter User's Guide • July 2012
Links
"Understanding the Adapter" on page 7
"Verify the Driver Version (Oracle Solaris 10)" on page 18
"Install the Adapter" on page 26
"Verify the Installation (Oracle SPARC)" on page 27
"Verify the Installation (Oracle Solaris x86)" on page 30
"Create Driver Instance Files (Oracle Solaris 10)" on page 34
"Configure the Network Host Files (Oracle Solaris 10)" on
page 34
"Driver Parameters (Oracle Solaris OS)" on page 44
"Set Driver Parameters (Oracle Solaris OS)" on page 45
"Boot Over the Network (PXE)" on page 36
"Boot Over a 10 GbE Network (Oracle Solaris x86 and
Linux)" on page 36
"Install Oracle Solaris 10 Over a Network (Oracle SPARC)" on
page 38
"Change the MTU Permanently" on page 48
"Link Aggregation Overview" on page 52
"Configure Link Aggregations (Oracle Solaris 10)" on page 52
"Display Information About Link Aggregations (Oracle
Solaris 10)" on page 53
"Delete Link Aggregations (Oracle Solaris 10)" on page 54
"VLAN Overview" on page 58
"VLAN Configuration" on page 61
"Configure Static VLANs (Oracle Solaris 10)" on page 62
Advertisement
Table of Contents
