Sony KP-48V80 Service Manual page 24

KP-48V80/53V80/61V80
RM-Y905 RM-Y905 RM-Y905
Adjusting Your SET UP (menus) (continued)
Speaker
Custom selection
of audio output
source
Audio Out
Easy control of
volume adjustment
SAVA SP Control
Controls Sony
SAVA speaker's
mode.
3 2
Using the Timer Menu
T i m e r
D a y l i g h t S a v i n g s : Y e s
C u r r e n t T i m e
O n / O f f T i m e r
ch
- - - - -
Move Select
After setting the clock you can use the timer
to turn the projection TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 29.
To select the Timer
/
Display Highlight
MENU
Tip z
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
On: Select to listen to the sound from the projection TV speakers alone.
Off: Select to turn off the projection TV speakers and listen to the
projection TV's sound only through an external audio system's speakers.
SAVA SP: Select to turn off the projection TV speakers and listen to the projection
TV's sound only through the Sony SAVA series speaker system. You can
adjust volume, muting, "Surround Mode," and "Super Woofer Mode" with the
projection TV's remote control. (see "SAVA SP Control" below)
Center: Select to use the projection TV as center speaker when you connect an
amplifier with a Dolby Pro Logic decoder. (see "Connecting an amplifier that
supports Dolby Pro Logic decoder" on page 15)
"Audio Out" can only be set when "Speaker" is set to "Off."
Fixed: Sound output is held at a fixed level through the audio system.
Use the AV receiver's remote control to adjust the volume.
Variable: Sound output varies according to the TV settings.
Useful when you want to use your remote control to control the output of a
separate audio system.
"SAVA SP Control" can only be set when Sony SAVA speaker system is
connected to the AUDIO (VAR/FIX) OUT connectors and "Speaker" is set to
"SAVA SP." (see "Speaker" above)
You can also adjust the SAVA speaker's volume using VOL +/– of the projection
TV's remote control.
Surround Mode: Select to activate the SAVA Speaker's surround mode.
Super Woofer Mode: Select to activate the SAVA Speaker's super woofer mode.
Daylight Savings
Automatically
adjusts the time.
Current Time
Necessary for the
: - - A M
Timer.
MENU
Exit
On/Off Timer
Wake up or
menu: scheduled viewing.
/
Select
Spring: Select Yes to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall: Select No at the end of Daylight Saving Time.
The current time moves back one hour.
1 Press , then move the joystick up or down until
the current day (Sun - Sat) is displayed, and press
.
2 Move the joystick up or down until the current hour
(1-12) and AM/PM is displayed, and press
3 Move the joystick up or down until the current minute
(00-59) is displayed, and press
The clock has now started. Press MENU to exit.
1 Move the joystick up or down until the desired day or
range of days (Every Sun-Sat, Every Mon-Fri,
Sunday, Monday, ....Saturday, Every Sunday,
....Every Saturday) is displayed, and press
2 Move the joystick up or down until the time (hours
and minutes) that you want the projection TV to
remain on is displayed, and then press
3 Move the joystick up or down to set the time duration (maximum of 6 hours)
and press .
4 Move the joystick up or down to select the desired channel and press
The timer is now set. The TIMER/STAND BY indicator on your projection TV
will be lit.
Press MENU to exit. To cancel your timer setting, press RESET while in the
On/Off Timer window. Performing Auto Program will erase all Timer settings.
– 24 –
C u r r e n t T i m e
– – : – – AM
– – –
.
Move Select Exit MENU
.
O n / O f f T i m e r
– – – – – –
– – : – – AM – h ch – – –
.
S u n 1 2 : 0 0 A M
Move Select Exit MENU
.
.
3 3