Mounting Of Protector - Makita EBH340U Instruction Manual

MOUNTING OF PROTECTOR

– The cutter blade must be well polished, free of cracks or breakage.
If the cutter blade hits against a stone during operation, stop the
engine and check the blade immediately.
– Polish or replace the cutter blade every three hours of operation.
CAUTION: The appropriate protector must always be installed, for your own safety and in order to comply
with accident-prevention regulations.
Operation of the equipment without the guard being in place is not permitted.
– The outside diameter of the cutter blade must be 305mm (12"). Never use any blades surpassing
305mm (12") in outside diameter.
– Fix the protector (1) to the clamp (3) with two bolts M6 x
20 (2).
14
(2)
(3)
(1)