Hunter 9101X Owner's Manual page 7

4. Grills and blades may be cleaned
with mild soap and water.
5. use a soft, slightly damp cloth
to wipe the remaining fan parts.
6. do Not allow water or any
other liquid to get into the mo-
tor housing or base.
7. reassemble the fan after blades
and grills have dried completely.
align the grills, replace the ring,
replace the decorative piece
decorative piece
(only on 9004X models)
Front
Grill
decorative piece
(only on 9004X models)
44801-01 10/17/2007
(only on 9004X models) and re-
place the screw.
NotE: to replace the decorative
piece, partially install the screw,
then hold the decorative piece
between the open ends of the
ring. Finish tightening the screw.
8. do Not plug fan into an elec-
trical outlet until it has been
fully reassembled.
ring
FIGurE 5
Back Grill
7