Related Manuals for Hunter 99183
Summary of Contents for Hunter 99183
- Page 1 LED Bowl Fitter LED Bowl Fitter Installation Manual Model 99183 Compatible with: 2xxxx Types A - Z 51000-58999 fan series 59500-59999 fan series Select Casablanca Fans MA011-01 • 09/26/13...
-
Page 2: Before You Begin
1.888.830.1326 BEFORE YOU BEGIN Read entire installation instructions carefully before beginning installation and save these instructions. Switch Housing Your light kit is compatible with most ceiling fans. The light kit will attach to the fan’s switch housing. Begin on page 3 where you will choose the type of switch housing that most closely resembles the one on your fan. - Page 3 1.888.830.1326 WHICH ASSEMBLY METHOD WILL I USE? Choose one of the four images below that most closely resembles the switch housing on your fan; then follow the instructions under the image. Switch Switch Switch Housing Housing Housing Screw Screw If your fan’s switch housing cap If your fan’s switch housing cap resembles resembles this one, remove the cap this one, remove the whole switch...
- Page 4 1.888.830.1326 TYPE-A ASSEMBLY INSTRUCTIONS Switch Wire Housing Connector If your fan does not have pin connectors on Using the single pin connectors, connect the black or blue wire from the fan to the the wires coming from the switch housing, black wire from the light kit.
- Page 5 1.888.830.1326 TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED) Fan Pull Globe Chain Globe Grommeted Keeper Hole Finial Cap Light Pull Finial Chain Installing the globe - Press the globe If necessary, attach the extension chain provided to the fan pull chain coming (sold separately) and globe keeper flush from the switch housing.
- Page 6 1.888.830.1326 TYPE-B ASSEMBLY INSTRUCTIONS Switch Light Kit Housing Wire Screw Connector If your fan does not have pin connectors on Remove the light kit screws attaching the light kit cap to the light fixture. the wires coming from the switch housing, install the wiring harness provided.
- Page 7 1.888.830.1326 TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED) Fan Pull Chain Grommeted Hole Switch Housing Light Pull Screw Chain Lift the light kit assembly up so that the If necessary, attach the extension chain screw holes in the lower switch housing provided to the fan pull chain coming line up with the holes in the upper switch from the switch housing.
- Page 8 1.888.830.1326 TYPE-C ASSEMBLY INSTRUCTIONS Washer and Nut Threaded Switch Wire Housing Connector If your fan does not have pin connectors on Feed the wires through the switch the wires coming from the switch housing, housing cap, washer, and nut. Then install the wiring harness provided.
- Page 9 1.888.830.1326 TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED) Upper Switch Housing Ring Screws Lift the light kit assembly up so that the Install the screws removed in Step 4 screw holes in the lower switch housing through the LED Ring and into the light line up with the holes in the upper switch kit cap.
-
Page 10: Troubleshooting
ONE YEAR WARRANTY This product is warranted to the original purchaser by Casablanca Fan Company/ Hunter Fan Company against defects in material and workmanship for one (1) year from date of purchase. During the warranty period, we will repair or, at our option, replace a defective product at no charge.