Hunter 9016x Owner's Manual page 9

17. align the three keyhole slots in
the Back Grille with the three re-
maining Grille Mounting Screws
in the Motor Face, and place the
Back Grille onto the Motor Face,
ensuring that the Grille Mount-
ing Screw washers are between
the screw head and the Back
Grille. If necessary, loosen the
three remaining Grille Mounting
Screws. See Figure 7.
FIGurE 7
18. rotate the Back Grille clockwise
to situate the screws in the nar-
row ends of the keyhole slots.
19. reinstall and tighten the up-
per Left Grille Mounting Screw
and tighten the remaing three
remaining Grille Mounting
Screws.
42733-01 04/26/2007
20. Loosen the Blade assembly
Setscrew so that it does not
protrude into the inside of the
Blade assembly Sleeve. See Fig-
ure 8.
FIGurE 8
Blade
assembly
Setscrew
Blade
assembly
Sleeve
9