Hunter 9016x Owner's Manual page 7

10. Hold the wall plug out of the
way and stand the fan upright.
11. Loosen the Height adjustment
Grip on the Telescoping pole by
turning it counterclockwise. See
Figure 3. raise theTelescoping
pole approximately 10 inches.
Turn the Height adjustment
Grip clockwise to set the height
of the Telescoping pole.
12. remove the Motor Mount Set-
screw (pre-loaded and tagged)
and set it aside for later reinstal-
lation. See Figure 3.
Front
Grille
42733-01 04/26/2007
Grille Blade
ring assembly
FIGurE 3
13. Connect the plugs coming from
the bottom of the Motor Mount
and the top of the Telescoping
pole. See Figure 4.
FIGurE 4
Back
Grille
Motor
Face
Motor Mount
Setscrew
(pre-loaded
and tagged)
Interlock Bracket
Fan
Motor
Motor
Mount
Telescoping
pole
Height
adjustment
Grip
7