Chevrolet 2005 Equinox Owner's Manual page 184

To load more than one CD but less than six, complete
Steps 1 through 3. When finished loading CDs, with
the radio on or off, press the LOAD button to cancel the
loading function. The radio will begin to play the last
CD loaded.
If more than one CD has been loaded, a number for
each CD will be displayed and the currently selected slot
number will be underlined.
Z (Eject): To eject a single CD press this button.
EJECTING CD # will appear on the display and
the single CD symbol will flash. When the CD is ready
to be removed the CD will eject part way from the
radio and REMOVE CD # will flash with the single CD
symbol flashing until the CD is removed. If the CD is
not removed within 25 seconds the radio will pull it
back in.
To eject multiple CDs, press and hold the eject button.
EJECTING ALL CDS will appear on the display, the
single CD symbol will flash, and you will hear a beep.
When the CD is ready to be removed the CD will
eject part way from the radio and REMOVE CD # will
flash with the single CD symbol flashing until the CD is
removed. If the CD is not removed within 25 seconds
the radio will pull it back in. After the CD is removed the
radio will repeat the previous actions until all of the
CDs have been removed or a CD is pulled back in.
3-74
Playing a Specific Loaded CD
For every CD loaded, a number will appear on the
display. To play a specific CD, press the numbered
pushbutton that corresponds to the CD you want to play.
A small bar will appear under the CD number that is
playing, and the track number will appear.
If an error appears on the display, see "CD Messages"
later in this section.
©
(Previous Track): Press this button to go to the
start of the current track if more than eight seconds have
played. If this button is pressed more than once, the
player will continue moving backward through the CD.
¨
(Next Track): Press this button to go to the start of
the next track. If this button is pressed more than once,
the player will continue moving forward through the CD.
s (Reverse): Press and hold this button to reverse
quickly within a track. You will hear sound at a reduced
volume. T#, the elapsed time of the track, and REV
will appear on the display. Release this button to play
the passage.
\ (Fast Forward): Press and hold this button to
advance quickly within a track. You will hear sound at a
reduced volume. T#, the elapsed time of the track,
and FWD will appear on the display. Release this button
to play the passage.