Product At A Glance; Safety Notes - Chauvet Bubble Machine User Manual

Chauvet bubble machine user manual
Table of Contents

Advertisement

Product at a
Glance

Safety Notes

Page 4 of 11
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Always disconnect the product from the power source before cleaning or replacing
the fuse.
Make sure the power cord is not crimped or damaged.
Never disconnect the product from power cord by pulling or tugging on the cord.
If mounting the product overhead, always secure to a fastening device using a
safety cable.
Make sure there are no flammable materials close to the product when operating.
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
Be sure that no ventilation slots on the product's housing are blocked.
Never connect the product to a dimmer.
Make sure to replace the fuse with another of the same type and rating.
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
The maximum ambient temperature is 104° F (40° C). Do not operate the product at
higher temperatures.
Do not leave unused fluid in the reservoir for an extended period. The fluid
may thicken in the reservoir.
In the event of a serious operating problem, stop using the product immediately.
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.
Auto Programs
Fixed voltage (120 V or 230 V)
Replaceable Fuse
User Serviceable
Duty Cycle
Bubble Machine User Manual (Rev. 04)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B-250

Table of Contents