Centurion Spas CT 10000 Owner's Manual page 33

Centrurion spas
Table of Contents

Advertisement

Filters
The filters in your spa should be removed and cleaned every 2
weeks with our special Filter Cleanser and typically replaced every
month (depending upon use). You can clean your filters with the
water pressure from the end of a garden hose then rinsed with
warm water. This ensures that the water is being filtered properly.
DO NOT USE BLEACH. Centurion Spas recommends having
replacement filters on hand, that can be swapped between
cleanings. Doing so enables you to quickly exchange the dirty
filters with the clean ones and immediately start your spa again.
Call our order line at (727) 490-2239 to order replacement filters
and our special Filter Cleanser.
Water
Depending on usage, the water in your spa should be changed
every 1-3 months. Upon each change of water it is a good
practice to wipe down your spa.
Jets
Remove and clean the jets as needed using our special Plumbing
Cleanser, water, and a cloth or soft-bristled brush. Call our order
line at (727) 490-2239 to order our special Plumbing Cleanser.
Pillows
Remove and clean the headrest pillows as needed using our
special Shell Cleaner and rinsed thoroughly with warm water. Call
our order line at (727) 490-2239 to order our special Shell Cleaner.
Light
Drain the spa and clean the light lens as needed using an optical
cloth and an eyewear cleaning product specifically designed not
to scratch optical surfaces. If the back side of the lens is also dirty
remove the rear panel, remove the light from the holder, and
clean in this same manner.
Spa Surface
The acrylic surface of your spa should be cleaned with our special
Shell Cleaner and thoroughly rinsed with warm (not cold) water
before refilling. Call our order line at (727) 490-2239 to order our
special Shell Cleaner.
31

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Centurion Spas CT 10000

Table of Contents