Centurion Spas CT 10000 Owner's Manual page 27

How do I bleed air from my system?
When draining and refilling your spa, the pump may become air
locked. An air-locked pump stops water from flowing in your spa
and is easily resolved by bleeding off the trapped air. To do this:
Turn off all pumps
•
Open the access panel below the topside control panel
•
Loosen a heater union until you hear the trapped air escape
•
Once water drips out in a continuous stream, hand tighten the
•
union until the water stops leaking
Loosen the discharge union on Pump 2 (if equipped) as above
•
Turn on all pumps to make sure that there are no leaks
•
Put the access panels back on
•
Where can I order more AquaClara Natural or other accessories?
Visit www.CenturionSpas.com/store and sign up for our easy-to-
use, auto-ship program and receive all the spa care products you
need sent to your home automatically every two months. Or
purchase a year's supply and save up to 20 percent. Or call
(727) 490-2239.
25