Centurion Spas CT 10000 Owner's Manual page 11

Caution: Connect only to a circuit protected by a residual
current device. Test the RCD before each use of the
spa.
Attention: Connecter uniquement a un circuit protege par un
disjoncteur differentiel. Toujours verifier l'efficacite du
disjoncteur differentiel avant d'utiliser le bain. Bonding
lugs. Cosses demise a la masse. Use the copper
conductors only. Employer uniquement des
conduteurs de cuivre.
Parts with extra low voltage not exceeding 12v must be
inaccessible to a person in the spa. Earthed appliances must be
permanently connected to fixed wiring. Parts incorporating
electrical components, except remote control devices, must be
located or fixed so that they cannot fall into the spa. Appliances
should be supplied through an RCD having a rated residual
operating current not exceeding 30ma.
Means for disconnection must be used in fixed wiring in
accordance with wiring rules.
Important – To allow the GFCI to function properly, connect the
white Neutral wire from the spa to the Neutral terminal on the GFCI
breaker, not the Neutral bus in the GFCI breaker box. An
improperly connected Neutral causes the GFCI breaker to trip.
Nos stations thermales sont certifiées par les Services
de l'Essai d'Intertek NA Ltd. Ontario à CAN/CSA-
C22.2 No. 218.1-M89 et ANSI/UL 1563.
9