4.1 DELIVERY CHECK
Check that all components comply with the delivery
note. Any damage incurred during transport should
be reported immediately to the delivery company.
Retain all packaging until the transport company has
inspected the consignment and an agreement has
been reached.
4.2 WHEELCHAIR OVERVIEW
10
5
9
9
9
9
9
7
2
6
14
1. Frame (chassis)
2. Backrest
3. Push handles
4. Seat
5. Rear wheel
6. Hand rims
7. Brakes
8. Castors
9. Anti tip device
10. Armrests
11. Jaw
18
4. S
-
ET
UP AND INSTALLATION
3
11
4
1
12
13
8
12. Legrests
13. Footrest
14. Footbow
4.3 ASSEMBLY
4.3.1 Rear wheels
Attach the rear wheels by pressing the button in the
centre of the hub whilst simultaneously sliding the
axle onto the rear wheel position attachment of the
positioning plate.
It is very important that you check
that the locking pin has actually
locked the wheel into position when
the centre button has been released.
Take hold of the wheels and try to
detach them. This should NOT be
possible.
4.3.2 Backrest
Unfold the backrest by grabbing the wire at the lower
back of the backrest and twisting it to release the
backrest locking pins. Pull the backrest backwards/
uppwards until it is fixed into place. Check that it is
fixed properly. The XLT Max does not have a locking
function. Just pull the backrest upwards and check that
it is fixed in place.
Be careful not to trap your fingers
between the frame and the backrest
attachments.
XLT
Invacare
®