Tool: Screw driver
2. Depth adjustment
Open the zip on the cover to reach screws (E)
and slacken with a screw driver. Adjust the trunk
support to the desired position. Re-tighten screws
and close the zip.
Tool: 5 mm Allen key
13 mm fixed spanner
3. Angle adjustment
Remove the cover on the arm of the trunk
support to reach the screws and nuts and slacken
them. Remember to secure tightly when the
desired position has been achieved.
Be careful not to catch your thumb
between the trunk support and the
wheel when propell-ing the chair.
XLT
Invacare
®
E
33