Table of Contents
Advertisement
3
Press .... or'" to select the item you want to control
and press@.
REGZA LINK Player Control menu functions:
1
Press M~U and open the
Applications
menu.
2
Highlight
REGZA LINK Player Control
and press
@.
With your TV's remote control, you can adjust or mute
the sound volume of the Audio Receiver. First, set the
MODE SELECT switch on the remote control to
TV.
• r.tJ
~
adjust the volume level.
• MCf
turns off the sound.
Note:
• To use this function.
Set Speaker Preference to Audio Receiver in the
REGZA LINK Setup menu.
- Confirm that a connected REGZA LINK device (such as
DVD player, etc) is selected for the Audio Receiver input
source.
• You can also use this function when the audio receiver is
connected to the TV's DIGITAL AUDIO OUT terminal (not
HOMI connection). In this case, select
a
digital audio input
mode on the Audio Receiver.
• These functions depend on the device connected.
VOLUME and MUTE controls of Audio
Receiver
Accesses the menu of a DVO.
Accesses the top menu of a OVO.
Turns the select device on and off.
Menu
Power
Top Menu
;, Start Demo
i~-'!
d:"--
- ..-. •--,-:,,:-:
:~':.,1~'
Note:
• These functions depend on the devices that are connected.
• The REGZA LINK Player Control item will be grayed out in
the following conditions:
- A non-HOMI input is currently selected.
- The Enable REGZA LINK item is set to Off.
- The connected CEC device is not a playback or recording
device.
Other REGZA LINK functions
When the
Enable REGZA LINK
and each item in the
REGZA LINK Setup
menu are set to
On,
the following
functions will be enabled.
If
a connected HDMI device starts
playing video or audio, the TV will
automatically switch to the
appropriate HOMI input.
TV Auto
Input Switch
Accesses the contents list when you
press@. At this time, the
REGZA LINK
Player Control
menu will disappear.
Contents
Menu
REGZA LINK input source selection
If
a REGZA LINK device with HOMI switching
capability (e.g. Audio Receiver) is connected to the
HOMI input, you can select another REGZA LINK
device that is connected to the master HOMI device
using the TV's INPUT button. See page 36 for details.
TV Auto
Power
Device Auto
Standby
Speaker
Preference
If
a REGZA LINK device is turned on,
the TV turns on automatically.
If
the TV is turned off, the TV will send
a message to turn off all of the REGZA
LINK devices connected to the TV.
From this item, you can set your audio
output preference to the TV speakers
or the audio receiver speakers. When
this item is set to Audio Receiver, the
TV remote can be used to adjust or
mute the volume of the audio. This
item will be grayed out unless a
REGZA LINK compatible audio
receiver is connected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to output the
sound from the TV speakers.
(continued)
53
I
Advertisement
Chapters
Table of Contents
