Chapter 3: Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries - Toshiba Regza42RV535U Owner's Manual

Preparing the remote control
for use
Installing the remote control
batteries
Remove the battery cover from the back of the
remote control.
Install two
/I
AAA" size batteries, making sure to
match the + and - signs on the batteries to the signs
on the battery compartment.
Your TV remote control can operate your TV and many
other devices such as cable converter boxes, satellite
receivers, VCRs, DVD players, and HTIBs (home theater
in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate
most Toshiba devices
(~
page 24).
If you have a non-Toshiba device or a Toshiba
device that the remote control is not
preprogrammed to operate:
You can program the TV remote control so it will operate
the other device
(~
pages 22-26).
1
2
Squeeze tab
and lift cover.
r~-----I:
)
I
20
3
Reinsert the battery cover in the remote control until
the tab snaps.
Caution: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
Note:
• Be sure to use AAA size batteries.
• Dispose of batteries in
a
designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations .
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
• Always remove batteries from the remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.