Table of Contents
Advertisement
Labeling the video input sources
To label the video input sources:
1
Press M~U and open the
Preferences
menu.
2
Highlight
Input Labeling
and press
8.
Off
E,n.glish "
x;
"
k Channel Labeling
i
Menu Language
'".,Channel Browser Setup
You can label each video input source according to the
type of device you connected to each source, from the
following preset list of labels:
• - - (default label)
• Audio Receiver
• Cable
• Compact Disc
• DTV
• DVD
• Game Console
• HDMI Switch (HDMI inputs only)
• Laser Disk
• PC (HDMI inputs only)
• Satellite / DSS
• VCR
• Video Recorder
• Hide (to hide an unused input in the
Input Selection
screen and in the Channel Browser Inputs list)
Note: If you select PC in the Input Selection screen, you can
choose only "- -", "Game Console", or "Hide" as the label.
Note:
• When selecting REGZA LINK input sources from the popup
window
using~,
some REGZA LINK devices may
automatically turn on.
• When selecting input sources using A
'Y,
you will have to
press
@
to actually select
a
particular device from the
popup window.
If a REGZA LINK device with HDMI switching
capability <e.g. Audio Receiver) is connected to
the HDMI input:
Press
~
on the remote or TV control panel repeatedly to
highlight HDMI1, HDMI2, HDMI3,
or
HDMI4.
If the connected CEC device has any connected devices,
a separate device selection popup window will appear.
Press
~
repeatedly to highlight the desired input
source, and then press
E8.
@ . €)
/4IlJa!D / mimi
to Select . . Navigate
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(I@' "Labeling the video input sources" at right).
• Sources can also be "hidden" (I@" "Labeling the video input
sources" at right).
• "No Video Signal" will appear randomly on the screen if no
signal is received in video input mode.
• If
a
CEC device
is
connected to an HOMI input, the REGZA
LINK icon will appear.
I@
ANT/CABLE
o
Video 1
6
Video 2
€)
ColorSlream H01
o
ColorStream H02
o
HOMI 1
IiIE!IlI3
(;) HOMI2
o
HOMI3
G
HOMI4
€)
PC
Selecting the video input source
to view
To select the video input source to view:
1
Press ~ on the remote control or TV control panel.
2
And then either:
a) Press 0-9; or
b) Repeatedly-Eress •
T
on the remote control and
then press
~
to change the input; or
c) Repeatedly press
~
on the remote control or TV
control panel to change the input.
The current signal source displays in the top right
corner of the
Input Selection
screen.
3
Press. or T to highlight the video source you want
to label.
I
36
Advertisement
Chapters
Table of Contents
