Advertisement
Quick Links
Advertisement
Related Manuals for Diamond Tech Powermiter IV
Summary of Contents for Diamond Tech Powermiter IV
- Page 1 DiamonD Tech innovations For creativity powermiter iv came Saw OperatiOns manual...
-
Page 2: Before You Begin
WARNING: This product contains small parts that may be a choking hazard to small children. KEEP OUT OF REACH OF CHILDREN. contents Your Powermiter iV has been shipped partially assembled. carefully remove saw and parts from packaging. 1- came Saw Body 2- Straight edge/angle cutting Guide... -
Page 3: Blade Replacement
Blade Replacement Diagram assembly instructions a. Blade guard assembly installation The PowerMiter IV is fully assembled with the exception of the Blade Guard Assembly and table height. All Diamond Tech power tools are product tested before shipping. FiG.1 1. attach the Blade Guard Shield (a) to the Blade Guard arm (B) using the screw provided (FiG.1). -
Page 4: Use And Maintenance
Table and Blade Guard assembly. use and Maintenance a. cross cutting/Mitering The PowerMiter IV is equipped with a standard sized medium duty cutting blade, perfect for cutting lead, zinc, came and brass channel. The two types of cutting are Cross Cutting and Mitering. -
Page 5: Troubleshooting
Page 4 - PowerMiter iv instruction Manual warning: Blade is extremely sharp! Keep fingers away from the cutting path of the blade. always wear eye protection while using this or any other table saw. B. Blade sharpening and replacement after extended use, the blade may become worn or dull. a dull blade is detectable by a slower cutting speed or if the material is left with a jagged or irregular edge.