Euro-Pro 380A Instruction Manual page 20

Bringing up the lower thread / Subir el hilo inferior
Hold the upper thread with your left hand. Turn the handwheel towards you with
your right hand until the needle goes down and comes up again to its highest
position (Fig. 1).
• Lightly draw up the needle thread forming a loop with the bobbin thread. The
upper thread should have caught the lower thread in a loop.
• Pull the needle thread toward you and the lower thread will come up from the
bobbin in a large loop (Fig. 2).
• Pull about 6" (15 cm.) of both threads away from you under the presser foot.
Sujetar la punta del hilo superior con la mano. Girar el volante hacia adelante
hasta que la aguja esté de nuevo en su posición más alta.
Tirar del hilo superior con lo que se hace subir el hilo inferior a través del
agujero de la placa de la aguja. Llevar los dos hilos hacia atrás por debajo
del pie.
Fig. 1
Fig. 2
20