L52DF* Indoor Gas Fireplace
Section 4: Wiring
Gas Control
Connector
Wiring for the optional Fan Kit
All L52DF fireplaces may be equipped with optional fan kits for circulating
heat into the living space.
Installations in Canada which employ the fans must be electrically
grounded in accordance with CSA C22.1 Canadian Electrical Code
Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be grounded in
accordance with local codes or, in the absence of local codes, with the
National Electrical Code, AnSI/nFPA 70-1987.
For more information see the Fan Kit Installation guide included with
the fan kit.
Page 16
Installation
Honeywell (Q3450)
Pilot Assembly
Pilot Electrical
Harness Connector
Honeywell Gas
Control (SV9501M)
Fan Plug
Receptacle
Gnd Screw
Wall Switch
Figure 20. Wiring for the L52DF-I with Honeywell gas control and pilot.
Junction Box
115VAC
24VAC
40 VA
Transformer
nOTE:
If any of the original wire supplied with the appliance is replaced, it
must be replaced with the same type, or its equivalent.
5/1/60 Supply
G
L1 L2
Quick Connect
Figure 21. Wiring schematic for optional fans.
Black
White
Green
L2-WH
G
L1-BLK
p g
lu to motor
XG0185 - 050611