Table of Contents
Advertisement
3.4 KVM Hotkey & Remote Console Hotkey
Local Console Hotkey
Scroll Lock + Scroll Lock + Space Bar
Right-button mouse + Esc
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Advance hotkeys (for Su pervisor login only)
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock + R
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock + L
Remarks: ■ Example of "Scroll Lock + Scroll Lock + Bank no. + Port no."
-
Bank No. : 1 to 8
- Port No. : 01 to 16
- e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0
- e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6
■
You must press the hotkey within 2 seconds
■ A beep sound will be heard for successful entering
■ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp,
PgDn, and Enter keys are supports
Remote Console Hotkey
Scroll Lock + Scroll Lock + C
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock + S
Scroll Lock + Scroll Lock + A
+
#
PgUp/ PgDn
Bank no. + Port no.
B
P
S
U
Function
Toggle switch between remote & local port
Turn the buzzer ON & OFF
Q
*Default the buzzer is ON
Activate auto-scan mode for remote & local port
*The scan time interval is 5 seconds
Auto-adjust the video signal
P.21
Matrix Cat6 KVM Usage
Function
Calling OSD menu
Calling OSD menu
Switch to previous port
Switch to next port
Switch to previous bank or next bank
Switch to specific port
Turn the buzzer ON and OFF
* Default the buzzer is ON
Logout the KVM if password security is
ON. Show up the status windows
Activate auto-scan mode for connected
servers
*Press any key to exit the auto-scan
mode
Reset all the KVM settings to factory
default
*Except User Security settings
Disable and enable password security
*Default security is ON
To enable / disable the screen saving
function and 10 minutes auto-logout
*Default the screen saving is OFF
+ 4
J
\
\
\
\
\
\
)
)
)
)
)
)
Advertisement
Table of Contents
