8 port / 16 port 1u rack mount kvm switch, optional remote ip access (22 pages)
Summary of Contents for I-Tech USB Hub DB-15 IP 2-console KVM
Page 1
NV Series User Manual USB Hub DB-15 2-console KVM NVIP800H / NVIP1600H USB Hub DB-15 2- console KVM NVCE800H / NVCE1600H USB Hub DB-15 KVM NV800H / NV1600H i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@itechlcd.com • WEB: www.iTechLCD.com...
Page 2
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Contents < Part 1 > USB Hub DB-15 2-console KVM NVIP800H NVIP1600H Package contents KVM port connection IP & Local console connection IP console setting Important Preconfi guration for IP console P.5 - 7 Built-in USB hub usage & connection Specifi...
Page 4
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content.
< Part 1 > USB Hub DB-15 < 1.1 > Package Contents USB Hub DB-15 IP KVM NVIP800H / NVIP1600H KVM unit NVIP800H or NVIP1600H KVM unit x 1 • • Mounting set w/ bracket & screws x 1 • Power adapter w/ power cord ( for KVM ) x 1 NVIP800H Local Console...
< 1.2 > KVM port connection USB Hub DB-15 IP KVM CB-6 / CB-10 / CB-15 USB Servers ■ 6 / 10 / 15 ft USB KVM cable ■ Support USB server DB-15 USB KVM port CB - 6 / 10 / 15 USB KVM cable support USB server USB Servers...
Page 7
< 1.3 > IP & Local console connection USB Hub DB-15 IP KVM Network device hub or router CAT 5 / 6 cable IP Console Frequency Resolution Support ( Hz ) 1600 x 1200 1280 x 1024 1024 x 768 60 / 70 / 75...
< 1.4 > IP console setting USB Hub DB-15 IP KVM After the cable connection, please take the following steps to confi gure the IP KVM : 1. Download IPKVMsetup.exe from the link: www.austin-hughes.com/support/utilities/cyberview/IPKVMsetup.exe 2. Double click IPKVMsetup.exe to confi gure the IP KVM by device setup as below. 3.
< 1.5 > Important Preconfi guration for IP console USB Hub DB-15 IP KVM You must complete the following tasks after the IP console setting is performed. ( 1 ) TARGET SERVER SETUP **Servers connected to KVM Resolution The IP KVM remote console recognizes several varieties of video display formats with resolutions up to 1600 x 1200 @60Hz.
Page 10
< 1.5 > Important Preconfi guration for IP console USB Hub DB-15 IP KVM ( 2 ) REMOTE CLIENT COMPUTER SETUP The remote client computer must have a web browser ( such as Microsoft Internet Explorer, Mozilla Firefox, and Netscape Navigator ) and a Java Virtual Machine ( version 1.4 or higher ) installed. Enable Java on the web browser.
Page 11
USB Hub DB-15 IP KVM 6) Click < Update > After the firmware has been updated, IP KVM will reset automatically. After one minute, you will be redirected to the Login page and requested to login again. - Completed...
< 1.6 > Built-in USB Hub Usage & Connection USB Hub DB-15 IP KVM 2 x USB 2.0 ( USB hub for device connection ) Flash Disk Hard disk storage Keyboard / Mouse Scanner Printer Camera...
< 1.7 > Specifi cations USB Hub DB-15 IP KVM NVIP800H NVIP1600H KVM Port ▀ Number of ports : 8 or 16 Connector : DB-15 combo connector Connectivity : Combo 2-in-1 VGA + USB KVM cable, 6, 10 or 15 feet Local Console ▀...
Part 2. USB Hub DB-15 2-console KVM < 2.1 > Package Contents USB Hub DB-15 2-console KVM NVCE800H / NVCE1600H NVCE800H or NVCE1600H KVM unit x 1 • • Mounting set w/ bracket & screws x 1 KVM unit • Power adapter w/ power cord ( for KVM ) x 1 •...
< 2.2 > KVM port connection USB Hub DB-15 2-console KVM CB-6 / CB-10 / CB-15 USB Servers ■ 6 / 10 / 15 ft USB KVM cable ■ Support USB server DB-15 USB KVM port CB - 6 / 10 / 15 USB KVM cable support USB server USB Servers P.11...
< 2.3 > Remote & Local console connection USB Hub DB-15 2-console KVM Local console Remote Cat6 Console Remote USB console For remote console, max. cable length is Receiver subject to the resolution. Please refer to the tables below. CAT 5 / 6 cable Remote Console Frequency Max.
Page 17
How to use a receiver to connect a remote console USB Hub DB-15 2-console KVM Local Power Computer Remote I/O Receiver Front Mouse Remote Local Rear Select button The receiver provides a hotkey function for remote console. Please refer to P.23 Remote Console Local computer...
< 2.4 > Built-in USB Hub Usage & Connection USB Hub DB-15 2-console KVM 2 x USB 2.0 ( USB hub for device connection ) Flash Disk Hard disk storage Keyboard / Mouse Scanner Printer Camera P.14...
Part 3. USB Hub DB-15 KVM < 3.1 > Package Contents USB Hub DB-15 KVM NV800H / NV1600H KVM unit NV800H or NV1600H KVM unit x 1 • • Mounting set w/ bracket & screws x 1 • Power cord ( for KVM ) x 1 CV-801H Power Local Console...
< 3.2 > KVM port connection USB Hub DB-15 KVM CB-6 / CB-10 / CB-15 USB Servers ■ 6 / 10 / 15 ft USB KVM cable ■ Support USB server DB-15 USB KVM port CB - 6 / 10 / 15 USB KVM cable support USB server USB Servers P.17...
< 3.3 > Built-in USB Hub Usage & Connection USB Hub DB-15 KVM 2 x USB 2.0 ( USB hub for device connection ) Flash Disk Hard disk storage Keyboard / Mouse Scanner Printer Camera P.18...
Part 4. Usage USB Hub DB-15 KVM Usage 4.1 KVM Button Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch fi nally computer Front Panel - Port LED Indications 8 ports Bank no.
4.2 Password USB Hub DB-15 KVM Usage The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ■ Enable password Scroll Lock + Scroll Lock + U Press the KVM hotkey Scroll Lock + Scroll Lock + P Logout the KVM by pressing the hotkey In SUPERVISOR level, enter “00000000”...
4.3 KVM OSD USB Hub DB-15 KVM Usage OSD Menu OSD operation next to the system name The PC is powered on next to the system name The PC is selected Access F1 MAIN MENU Logout the OSD menu Previous menu Cancel / Quit Enter Complete / Switch to selected port...
4.4 KVM Hotkey & Remote Console Hotkey USB Hub DB-15 KVM Usage Local Console Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port...
Page 28
4.5 Options : DC Power USB Hub DB-15 KVM Usage Model 125V Input rating Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V Input current - No load 50 mA 50 mA 50 mA 35 mA...
Need help?
Do you have a question about the USB Hub DB-15 IP 2-console KVM and is the answer not in the manual?
Questions and answers