Kvm Hotkey & Remote Console Hotkey - I-Tech USB Hub DB-15 IP 2-console KVM User Manual

4.4 KVM Hotkey & Remote Console Hotkey
Local Console Hotkey
Scroll Lock + Scroll Lock + Space Bar
Right-button mouse + Esc
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Advance hotkeys (for Supervisor login only)
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Remarks:
■
Example of "Scroll Lock + Scroll Lock +
-
Port No. : 01 to 16
-
e.g. Port 4 : Scroll Lock + Scroll Lock + 0 + 4
-
e.g. Port 16 : Scroll Lock + Scroll Lock + 1 + 6
■
You must press the hotkey within 2 seconds
■
A beep sound will be heard for successful entering
■
The numeric keypad is not supported, while in OSD screen, the arrow keys, and Enter keys
are supports
Remote Console Hotkey
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Port no.
B
P
S
R
U
L
Port no."
Function
C Toggle switch between remote & local port
Turn the buzzer ON & OFF
Q
*Default the buzzer is ON
Activate auto-scan mode for remote & local port
S
*The scan time interval is 5 seconds
A Auto-adjust the video signal
P.23
USB Hub DB-15 KVM Usage
Function
Calling OSD menu
Calling OSD menu
Switch to previous port
Switch to next port
Switch to specifi c port
Turn the buzzer ON and OFF
* Default the buzzer is ON
Logout the KVM if password security is
ON. Show up the status windows
Activate auto-scan mode for connected
servers
*Press any key to exit the auto-scan
mode
Reset all the KVM settings to factory
default
*Except User Security settings
Disable and enable password security
*Default security is ON
To enable / disable the screen saving
function and 10 minutes auto-logout
*Default the screen saving is OFF