Age Guidelines; Stroller Assembly; Unpack Stroller; Wheels - BOB Gear REVOLUTION Instruction Manual

AGE GUIDELINES

Prior to first use, consult with your
pediatrician regarding suitability of
stroller use with your child. Britax
recommends that your child should be
at least 8 weeks old before riding in a
BOB stroller without a BOB Infant Car
Seat Adapter and compatible infant car
seat. Please note that infants incapable
of holding their head up must have
additional head and neck support to ride
safely and comfortably. With the addition
of the BOB Infant Car Seat Adapter and
compatible infant car seat, newborns
may be able to ride in the stroller.
For jogging or off-road stroller use,
Britax suggests children be at least
8 months old, or as directed by your
pediatrician. Children are unique and
develop at different rates. Most may not
have the neck strength for jogging or
off-road motion until 8 months of age.
Please refer to the below table for
age/use guidelines:
SUGGESTED USE
Infant Car Seat
Adapter (Walk Only)
See BOB Infant Car Seat Adapter Manual
for maximum occupant weight.
Walk Only
Jogging/Off-Road

STROLLER ASSEMBLY

UNpACk STROLLER

Remove stroller and wheels from box.
Front wheel is stowed in folded stroller.
WARNING
all packaging materials and discard to
avoid choking and suffocation hazards.
6
UGA08C
AGE
0 - 8 Weeks
8 Weeks - 8 Months
8 Months - 5 Years
Remove

WHEELS

Before attempting to install wheels, read
warnings and instructions completely.
WARNING
your stroller with an improperly
adjusted wheel quick release lever
can allow the wheel to vibrate,
wobble or become detached from
the stroller. This can result in serious
injury or death. Accordingly, it is
critical that you:
• Ask your dealer to instruct you
on the proper technique for
safely installing and removing
your wheels.
• Use the proper method for
securely clamping a wheel to
the stroller using a quick release
lever.
• Check to make sure the wheels
are securely clamped before
each use of the stroller.
• Watch the instructional video on
Quick Release Wheel Installation
at www.bobgear.com.
The wheel quick release lever is a
device that supplies the clamping force
required to hold the stroller wheel
securely in place. To safely secure
a wheel to the stroller, it is critical
that you understand how the quick
release works, how to use and adjust
it properly and the amount of force
necessary to safely secure the wheel.
WARNING
quick release lever is not a wing nut
system and turning the lever while
holding the tension adjusting nut does
not supply the required force to safely
clamp the wheel in the dropouts.
Using
The