Table of Contents
Advertisement
Deleting Name Tags
The system uses the following commands to delete
name tags:
•
Delete
•
Delete all name tags
Using the Delete Command
The delete command allows specific name tags to be
deleted.
To use the delete command:
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Delete". The system responds with "Delete,
please say the name tag" followed by a tone.
3. Say the name tag to be deleted. The system
responds with "Would you like to delete, <name
tag>? Please say yes or no".
•
If the name tag is correct, say "Yes" to delete
the name tag. The system responds with
"OK, deleting <name tag>, returning to the
main menu."
•
If the name tag is incorrect, say "No". The
system responds with "No. OK, let's try again,
please say the name tag."
4-78
for two seconds. The system
Using the Delete All Name Tags Command
The delete all name tags command deletes all stored
phone book name tags and route name tags for OnStar,
if present.
To use the delete all name tags command:
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Delete all name tags". The system responds
with "You are about to delete all name tags stored
in your phone directory and your route destination
directory. Are you sure you want to do this? Please
say yes or no."
•
Say "Yes" to delete all name tags.
•
Say "No" to cancel the function and return to the
main menu.
Making a Call
Calls can be made using the following commands:
•
Dial
•
Digit Dial
•
Call
•
Re-dial
for two seconds. The system
Advertisement
Chapters
Table of Contents
