Antilock Brake System (Abs) Warning Light; Electronic Stability Control (Esc)/Traction Control System (Tcs) Indicator/Warning Light - Chevrolet Malibu 2010 Owner's Manual

Hide thumbs Also See for Malibu 2010:
Table of Contents

Advertisement

Antilock Brake System (ABS)
Warning Light
If it does not, have the vehicle serviced by your
dealer/retailer. If the system is working normally the
indicator light then goes off.
If the ABS light stays on, turn the ignition off. If the light
comes on while driving, stop as soon as it is safely
possible and turn the ignition off. Then start the engine
again to reset the system. If the ABS light stays on,
or comes on again while driving, the vehicle needs
service. If the regular brake system warning light is not
on, the vehicle still has brakes, but not antilock
brakes. If the regular brake system warning light is also
on, the vehicle does not have antilock brakes and
there is a problem with the regular brakes. See Brake
System Warning Light on page 4-31.
4-32
For vehicles with the
Antilock Brake System
(ABS), this light comes on
briefly when the engine
is started.
For vehicles with a Driver Information Center (DIC), see
DIC Warnings and Messages on page 4-43 for all
brake related DIC messages.
Electronic Stability Control
(ESC)/Traction Control System
(TCS) Indicator/Warning Light
If it does not, have the vehicle serviced by the
dealer/retailer. If the system is working normally the
indicator light goes off.
If this light is on while certain DIC messages display,
this indicates that the ESC and TCS are not working or
are disabled.
The Electronic Stability
Control (ESC) system or
the Traction Control
System (TCS)
indicator/warning light
comes on briefly when the
engine is started.

Advertisement

Table of Contents
loading

Table of Contents