Switch - Hyundai 2009 Entourage Owner's Manual

To deactivate the immobilizer
system:
Insert the ignition key into the key cylin-
der and turn it to the ON position.
To activate the immobilizer sys-
tem:
Turn the ignition key to the OFF position.
The immobilizer system activates auto-
matically. Without a valid ignition key for
your vehicle, the engine will not start.
WARNING
In order to prevent theft of your
vehicle, do not leave spare keys
anywhere in your vehicle. Your
Immobilizer password is a cus-
tomer unique password and should
be kept confidential. Do not leave
this number anywhere in your vehi-
cle.
✽ ✽ NOTICE
When starting the engine, do not use the
key with other immobilizer keys in close
proximity to your vehicle's ignition
switch, otherwise the engine may not
start or may stop soon after it starts.
✽ ✽ NOTICE
If you need additional keys or lose your
keys, consult your authorized Hyundai
dealer.
CAUTION
Do not put metal accessories
near the key or ignition key.
The engine may not start for the
metal accessories may interrupt
the transponder signal from
normally transmitting
Features of your vehicle
Limp home (override) procedure
When you turn the ignition key to the ON
position, if the immobilizer indicator
( ) goes off after blinking 5 times,
your transponder equipped in the ignition
key is out of order. You cannot start the
engine without the lime home procedure.
To start the engine, you have to input
your password by using the ignition

switch.

The following procedure is how to input
your password of "2345" as an example.
1. Turn the ignition key to the ON position.
The immobilizer indicator (
blink 5 times and go off indicating the
beginning of the limp home procedure.
2. Turn the ignition key to the ACC posi-
tion.
3. To enter the first digit (in this example
"2"), turn the ignition key to the ON and
ACC position twice. Perform the same
procedure for the next digits between 3
seconds and 10 seconds (for example,
for "3", turn the ignition ON and ACC 3
times).
) will
3 9