Fujitsu ABY30TL MA Operating Manual page 13

To Change Selected Time Settings
Press the START/STOP button to stop the air conditioner, and then proceed as fol-
lows.
1 Carry out steps 1 to 3 of the "Setting Up the Weekly
Timer Operation" procedure to select the day you want
to edit.
2 Press the SET button to select the time that you want
to change.
The selected setting flashes on the display. Each press moves you to the
next setting for the selected day, as follows.
WEEKLY 1
ON
3 Press the SET TIME button to change the time setting.
4 Press the SET button.
The new setting overwrites the previous setting.
5 Once the setting has been canceled, hold down the SET
button for 3 seconds.
The WEEKLY display flashes briefly, and then the clock display appears.
NOTES:
In the following cases, cancel the set time prior to making the required amendments.
(1) If you want to change the ON time to a time that is later than the currently set OFF time.
Change
(2) If the change would cause a temporary overlap between the first and second ON/OFF time spans.
ON
Change
WEEKLY 1 WEEKLY 2
OFF ON
ON OFF
WEEKLY 1
OFF
WEEKLY 1
ON
WEEKLY 1
WEEKLY 2
OFF
Example: Changing the "WEEKLY 2"
ON OFF
WEEKLY 1
ON OFF
WEEKLY 2
Temporary overlap
OFF
ON
WEEKLY 2
AUTO
ON
TIMER
DAY
WEEKLY
OFF
1 2
DEFROST TEST
TIMER SET TIME TEMP./DAY FAN
MODE CONTROL
MASTER
CONTROL
CLOCK ADJUST
START/STOP
SET DAY OFF
2
ON setting for day 5 (Friday)
from 14:00 to 15:30.
AUTO
ON
TIMER
DAY
WEEKLY
OFF
1 2
DEFROST TEST
TIMER SET TIME TEMP./DAY FAN
MODE CONTROL
MASTER
CONTROL
CLOCK ADJUST
START/STOP
3 SET DAY OFF
4
Time
Time
Time
OFF
Time
En-13
AUTO
AUTO