Table of Contents
Advertisement
Operation
Remote Operation
For your convenience, a remote control is provided with this air purifier. The remote may be
used to turn the air purifier on or off and adjust the fan speed.
Operating the Air Purifier with the remote:
1. Install two AAA batteries (UM-4 or IEC R03 or equivalent). Refer to the
graphics in the battery compartment for proper orientation of the batteries.
2. To use the remote, point it at the air purifier, then press and release the
appropriate key. The key functions are as follows: 0 - OFF, 1 - LOW,
2 - MEDIUM, and 3 - HIGH.
When using the remote, the air purifier remains in the mode that it is currently set for.
When the keypad is locked, the remote may still be used to adjust the speed or turn off the
air purifier.
If the remote is not working properly, first be sure that the remote is facing the air purifier
when pressing the key. If it still does not work, check the batteries.
41674-01
41674-01_REV 3-11-05.pmd
8
8
3/11/05, 5:01 PM
Advertisement
Table of Contents
