operaTIng your aIr purIfIer
Ultra Low - No background noise.
Low speed - Recommended for use when soft
background noise is unwanted.
Medium speed - Typical usage setting. Soft
background noise is not an issue.
High speed - Use when quick, efficient results
to a room's air quality are desired.
The fan speed can be adjusted at any time by pressing
the
Speed button until the desired speed is selected.
Press the
UVC Light Button to turn on and off the
UVC function of your Air Purifier.
NOTE: The ON/OFF Indicator and the UVC Indicator
will stay lit while the fan and/or UVC is running.
remoTe operaTIon
See Figure 7.
ON
Turns the unit on or off.
OFF
Turns the UVC light on or off.
UV
Adjusts the speed of the air purifier between
high, medium, or low.
aIr purIfIer maInTenanCe
It is necessary to periodically check your Air Purifier for
performance. If the Pre-Filter and/or Permanent HEPA
Filter are covered in dust and other captured particles, it
will be necessary to clean one and or both. The Pre-Filter
and Filter should be checked at least every 6 months. The
UVC Light should be replaced every year.
NOTE: Some environments may require more frequent
cleaning of each filter. In these situations, adjust the time
you check your filters to ensure the filters stay clog free to
optimize performance.
©2010 Hunter Fan Co.
UVC
on/off
UV
OFF
7
Speed
UV
UV
SPEED
SPEED
SPEED
ON / OFF
figure 6.
ON
UV
figure 7.
Press
Down
figure 8.
44069-01 20100618