Reading The Digital Display; Using The Remote - Hunter ExtremeAir HPF500 Quick Start Manual

Operating Your Air Purifier
replaced more regularly. After pre-filter is replaced, press and hold the Filter
Indicator button for 3 seconds. The unit will beep 3 times to indicate reset.
HEPA Filter Indicator Light: Your Hunter
replace the HEPA filter after 6 months, based on continuous use (approximately
4,320 hours). The indicator is only a guide. Depending on air quality and
environmental factors, pre-filters may need to be replaced more regularly .After
pre-filter is replaced, press and hold the Filter Indicator button for 3 seconds. The
unit will beep 3 times to indicate reset.

READING THE DIGITAL DISPLAY

Timer: When using timer function,
time will display next to Timer button.
Speed: Bars indicate which Speed
has been selected.
Pre-Filter Indicator LIght: Your Hunter
programmed to remind you to replace the pre-filter after
3 months, based on continuous use (approximately
2,160 hours). A light will appear on digital display,
indicating pre-filter should be replaced.
HEPA Indicator LIght: Your Hunter
programmed to remind you to replace the HEPA filter
after 6 months,
(approximately 4,320 hours). A light will appear on
digital display, indicating HEPA filter should be
replaced.

USING THE REMOTE

Remote has magnet to store on air purifier. Attach
remote to back of air purifier, at base of blade, with
buttons facing out.
Power: Press On/Off to power on. Press again to power
off.
7
Rotate: To turn rotation on or off, press
air purifier is programmed to remind you to
®
air purifier is
®
air purifier is
®
based on continuous use