Introduction - Generac Power Systems BELT DRIVEN POWER WASHER Opeartor's Manual

Congratulations on the purchase of your new cold water power washer! You can be assured your new cold water power
washer was constructed with the highest level of precision and accuracy. Each component has been rigorously tested
by technicians to ensure the quality, endurance and performance of this unit.
This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual, you will receive years of trouble free operation from
your new cold water power washer. The contents of this manual are based on the latest product information available at
the time of publication. Generac reserves the right to make changes in price, color, materials, equipment, specifications
or models at any time without notice.
tHese paragrapHs are surrounded by a "safety alert boX". tHis boX is used
to designate and empHasize safety warnings tHat must be followed wHen
operating tHis power wasHer.
accompanying tHe safety warnings are "signal words" wHicH designate tHe
degree or level of Hazard seriousness. tHe "signal words" used in tHis
manual are as follows:
DANGER:
WARNING:
CAUTION:
tHe symbols set to tHe left of tHis paragrapH are "safety alert symbols".
tHese symbols are used to call attention to items or procedures tHat could
be dangerous to you or otHer persons using tHis equipment.
always provide a copy of tHis manual to anyone using tHis equipment. read
all instructions before operating tHis power wasHer and especially point
out tHe "safety warnings" to prevent tHe possibility of personal injury to
tHe operator.
Once the unit has been removed from the box, immediately write in the serial number of your unit in the space provided
below.
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim with the transportation
company immediately. Be sure that all damaged parts are replaced and that the mechanical problems are corrected
prior to operation of the unit. If you require service, contact Generac Customer Service by phone at 1-888-436-3722 or
on the internet at www.generac.com.

introduction

! important !
indicates an imminently Hazardous situation wHicH, if not
avoided, will result in deatH or serious injury.
indicates a potentially Hazardous situation wHicH, if not
avoided, could result in deatH or serious injury.
indicates a potentially Hazardous situation wHicH, if not
avoided may result in minor or moderate injury.
serial number_________________________________
Please have the following information available for all service calls:
1.
2.
3.
Model Number
Serial Number
Date and Place of Purchase
3