Generac Power Systems 1042-2 Owner's Manual
  1. Manuals
  2. Brands
  3. Generac Power Systems Manuals
  4. Pressure Washer
  5. 1042-2
  6. Owner's manual

Generac Power Systems 1042-2 Owner's Manual

2250psi high pressure washer
Hide thumbs Also See for 1042-2:
Table of Contents

Advertisement

Quick Links

Download this manual
2250PSI
GENERAC

Advertisement

Table of Contents
loading

Related Manuals for Generac Power Systems 1042-2

Summary of Contents for Generac Power Systems 1042-2

  • Page 1 2250PSI GENERAC...

  • Page 3: Product Specifications

    PRODUCT SPECIFICATIONS Pressure Washer Specifications Engine specifications CUSTOMER RESPONSIBILITIES...

  • Page 4: Know Your Pressure Washer

    KNOW YOUR PRESSURE WASHER...

  • Page 5: Carton Contents

    PREPARING THE PRESSURE WASHER FOR USE REMOVE PRESSURE WASHER FROM CARTON CARTON CONTENTS Attach the Handle Figure 1 — Attach the top of the handle to the bottom of the handle.
  • Page 6 Figure 2 — Insert the carriage bolt and hook and attach the knobs. Figure 4 — Add oil to engine crankcase. Do not attempt to start engine without adding oil. Figure 3 — Fit wire form on handle. Add Gasoline Add Engine Oil...
  • Page 7 Figure 6 — Connect high pressure hose to spray gun. Figure 5 — Add gasoline to fuel tank. Figure 7 — Connect high pressure hose to pump. Connect Hose and Water Supply to Pump...

  • Page 8: Checklist Before Starting Engine

    CHECKLIST BEFORE Figure 8 — Connect the garden hose to water inlet and turn ON the water. STARTING ENGINE Figure 9 — Connect nozzle extension to spray gun.

  • Page 9: Pressure Washer

    HOW TO USE YOUR Figure 10 — Safety Latch. PRESSURE WASHER How to Start Your Engine How to Stop Your Pressure Washer...
  • Page 10 How to Use the Adjustable Figure 12 — Pressure control knob. Nozzle and Adjust Pressure Figure 11 — Using the adjustable nozzle.
  • Page 11 Applying Detergent with the Adjustable Nozzle Pressure Washer Rinsing Figure 13 — Insert the small filter into container of cleaning solution. Automatic Cool Down System (Thermal Relief)

  • Page 12: Pressure Washer Maintenance

    GENERAL MAINTENANCE RECOMMENDATIONS Check Chemical Injection Tube Check Gun and Wand BEFORE EACH USE Purge Pump of Air and Contaminants PRESSURE WASHER MAINTENANCE Check and Clean Inlet Screen Check High Pressure Hose...

  • Page 13: Engine Maintenance

    Cleaning Chemical Injection Tube Figure 18 — Backflushing the nozzle. Nozzle Maintenance ENGINE MAINTENANCE SERVICE AND ADJUSTMENTS Figure 17 — Removing and cleaning nozzle.

  • Page 14: Preparing The Unit For Storage

    PREPARING THE UNIT FOR STORAGE STORING THE ENGINE...
  • Page 16 Problem Cause Correction...
  • Page 17 PROBLEM CAUSE CORRECTION...

Table of Contents