Toshiba Portege M300 User Manual page 213

Wireless IEEE 802.11 Channels Sets (Revision B and G)
Frequency Range
Channel ID
1
2
3
4
5
6
7
8
9
10
11
12
13
*1 Factory-set default channels
*2 Refer to the sheet Approved Countries/Regions for use for the countries/
regions that in which these channels can be used. When installing Wireless
LAN cards, the channel configuration is managed as follows:
For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
For Wireless LAN cards installed in wireless clients that operating in a
peer-to-peer mode, the card will use the default channel 10.
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
User's Manual
2400-2483.5 MHz
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457*
1
2462
2467*
2
2472*
2
Wireless LAN
F-3