Toshiba Portege M300 User Manual page 133

HDD −> FDD −> CD-
ROM −> LAN
HDD −> CD-ROM −>
LAN −> FDD
FDD −> CD-ROM −>
LAN −> HDD
CD-ROM −> LAN −>
HDD −> FDD
CD-ROM −> LAN −>
FDD −> HDD
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
* FDD is looked for when the boot disk is contained in external FDD. When
1
SD memory card is set as the boot disk, external FDD is looked for first.
Next, SD memory card is looked for.
* In this computer, CD-ROM refers to the Fixed optical media drive.
2
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Built-in
HDD, CD-ROM, FDD (or SD memory card), Network (LAN) boot.
A bar will appear only under the selected device.
User's Manual
The computer looks for bootable files in the
following order: HDD, floppy disk drive*
ROM*
The computer looks for bootable files in the
following order: HDD, CD-ROM*
floppy disk drive*
The computer looks for bootable files in the
following order: floppy disk drive*
LAN and HDD.
The computer looks for bootable files in the
following order: CD-ROM*
disk drive*
The computer looks for bootable files in the
following order: CD-ROM*
drive*
U Selects the USB floppy disk drive.
N Selects the Network.
1 Selects the primary HDD.
C Selects the CD-ROM*
and LAN (Default).
2
.
1
.
1
and HDD.
1
.
2
HW Setup
, CD-
1
, LAN and
2
, CD-ROM*
1
, LAN, HDD, floppy
2
, LAN, floppy disk
2
,
2
7-3