Toshiba Portege M300 User Manual page 137

Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy Emulation
item to Enabled.
Enabled
Disabled
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled
Disabled
User's Manual
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP (Default).
This setting should be used with some other
parallel devices.
Enables the USB KB/Mouse Legacy Emulation
(Default).
Disables the USB KB/Mouse Legacy Emulation.
Enables the USB-FDD Legacy Emulation
(Default).
Disables the USB-FDD Legacy Emulation.
HW Setup
7-7