Usb Floppy Disk Drive; Sd Card - Toshiba Portege M300 User Manual

USB floppy disk drive

For more information, refer to Chapter 4,
Problem
Drive does not operate There may be a faulty cable connection. Check
Some programs run
correctly but others do
not
You cannot access the
external 3 1/2" floppy
disk drive

SD card

Refer also to Chapter 8,
Problem
SD card error occurs
You cannot write to an
SD memory card
You cannot read a file
User's Manual
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), Addressing
Method 2
Check the region code on the DVD. It must
match that on the DVD Super Multi drive. Region
codes are listed in the
section in Chapter 2, The Grand Tour.
Operating
Procedure
the connection to the computer and to the drive.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software needs.
Try another floppy disk. If you can access the
floppy disk, the original floppy disk (not the drive)
is probably causing the problem.
If problems persist, contact your dealer.
Optional Devices.
Procedure
Reseat the SD card to make sure it is firmly
connected.
Check the card's documentation.
Make sure the card is not write protected.
Make sure the target file is on the SD memory
card inserted in the slot.
If problems persist, contact your dealer.
Troubleshooting
TM
Optical media drives
Basics.
9-11