Toshiba Portege M300 User Manual page 134

HW Setup
3. Use the left/right cursor keys to highlight the boot device you want and
press Enter.
If a supervisor password is set only, it is the following.
If the supervisor and user password are set, it is the following.
The selection method above does not change the boot priority settings
in HW Setup.
If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
Keyboard
External Keyboard Fn key
Use this option to set a key combination on an external keyboard to
emulate the Fn key on the computer's internal keyboard. Setting an Fn key
equivalent will let you use Hot keys by pressing the set combination instead
of the Fn key (PS/2 keyboard only).
Disabled
Fn Equivalent
7-4
The menu above appear when you use the user password to start
the computer (able to run HW Setup).
The menu above does not appear when you use the user password
to start the computer (unable to run HW Setup).
The menu above appear when you use the supervisor and user
password to start the computer (able to run HW Setup).
The menu above does not appear when you use the user password
to start the computer (unable to run HW Setup).
The menu above appear when you use the supervisor password to
start the computer (unable to run HW Setup).
[PXE] Sets PXE as the protocol (Default).
[RPL] Sets RPL as the protocol.
No Fn key equivalent (Default).
Left Ctrl
Right Ctrl
Left Alt
Right Alt
Left Alt
+ Left Alt
+ Right Alt
+ Left Shift
+ Right Shift
+ Caps Lock
User's Manual