Introduction; Important Reminders For All Enclosures - Onnto 2.5" SATA HDD Enclosure User Manual

Introduction

Thank you for your purchase of the 2.5" SATA Hard Disk Drive Enclosure.
Your 2.5" SATA Hard Disk Drive Enclosure offers fast and reliable data
transfer. Proper installation, care and use, as described in the User's Manual
will ensure trouble-free use and prolong the life of your 2.5" SATA HDD
Enclosure.
The installation instructions in this manual apply to the following models.
• USB 2.0
• eSATA/USB 2.0 Combo
Please thoroughly read and follow the instructions provided in this
manual. Failure to do so may result in damage to the 2.5" SATA HDD
Enclosure and any or all of the connected devices.

Important Reminders for all Enclosures

• The main circuit board of 2.5" SATA HDD Enclosure is susceptible to
static electricity. Proper grounding is required to prevent electrical
damage to 2.5" SATA HDD Enclosure or other connected devices,
including the computer host. Always place 2.5" SATA HDD Enclosure
on a smooth surface and avoid all dramatic movement, vibration and
percussion.
• Do NOT allow water to enter 2.5" SATA HDD Enclosure.
• Avoid placing 2.5" SATA HDD Enclosure near magnetic devices (such
as a mobile phone), high-voltage devices (such as a hair dryer), or
near a heat source (such as the dashboard of a car or anywhere 2.5"
SATA HDD Enclosure will be subject to direct sunlight).
• The operating system may NOT detect 2.5" SATA HDD Enclosure if it
does not support the interface of your device. If so, installation of an
appropriate driver or additional equipment in the host computer may be
required.
• Ensure that only a 2.5" SATA Hard Disk Drive (HDD) is installed.
Attempting to install any other HDD may damage the 2.5" SATA HDD
Enclosure Kit.
3