Introduction; Important Reminders - Onnto SATA to USB 2.0 3.5” HDD Enclosure Kit User Manual

SATA 3.5" HDD Enclosure User Manual

Introduction

Thank you for purchasing the 3.5" SATA HDD Enclosure Kit.
This User's Manual provides instructions on assembling and using the following
products.
• SATA to USB 2.0 3.5" HDD Enclosure Kit
• SATA to eSATA/USB2.0 3.5" HDD Enclosure Kit
• SATA to eSATA/FireWire800/USB 2.0 3.5" HDD Enclosure Kit
Please thoroughly read and follow the instructions provided in this manual. Failure to
do so may result in damage to the Enclosure Kit and any or all of the connected
devices.

Important Reminders

1. The main circuit board of the Enclosure is susceptible to static electricity.
Proper grounding is required to prevent electrical damage to the Enclosure or
other connected devices, including the computer host. Always place the
Enclosure on a smooth surface and avoid all dramatic movement, vibration and
percussion.
2. Do NOT allow water to enter the Enclosure.
3. Avoid placing the Enclosure near magnetic devices (such as a mobile phone),
high-voltage devices (such as a hair dryer), or near a heat source (such as the
dashboard of a car or anywhere the Enclosure will be subject to direct sunlight).
4. The operating system may NOT detect the Enclosure if it does not support the
interface of your Enclosure. If so, installation of an appropriate driver or
additional equipment in the host computer may be required.
Version 01
2
© 2006 All rights reserved.