Esata/Usb 2.0 Model - Onnto 2.5" SATA HDD Enclosure User Manual

4) Connect the free end of the USB A to mini B cable to an available
USB 2.0 port on the host computer.
You are now ready to use your 2.5" SATA HDD Enclosure.

eSATA/USB 2.0 model

1) Connect the DC Jack to USB Y-cable to the DC IN port FIRST.
2) If the USB 2.0 connector is selected for data transfer, connection to
only one USB port on the host computer via Y-cable is required.
The LED now is active.
3) If the eSATA connector is selected for data transfer, connection to
two USB ports on the host computer via Y-cable is required. The
LED is now active.
9