Table of Contents
Advertisement
Quick Links
3.5" SATA HDD Enclosure Kit
Introduction...................................................................................................... 2
Important Reminders ....................................................................................... 2
Getting Started ................................................................................................ 3
Package Contents........................................................................................ 3
System Requirements.................................................................................. 4
Assembling the SATA 3.5" HDD Enclosure ..................................................... 4
Hard Drive Installation.................................................................................. 4
Connecting the Enclosure to a Computer ........................................................ 7
Notes on Operating the Enclosure ............................................................... 9
Notices and Classifications............................................................................ 10
FCC-B Radio Frequency Interference Statement ...................................... 10
User's Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Onnto SATA to USB 2.0 3.5” HDD Enclosure Kit
Summary of Contents for Onnto SATA to USB 2.0 3.5” HDD Enclosure Kit
-
Page 1: Table Of Contents
3.5” SATA HDD Enclosure Kit User’s Manual Introduction...................... 2 Important Reminders ..................2 Getting Started ....................3 Package Contents..................3 System Requirements.................. 4 Assembling the SATA 3.5” HDD Enclosure ............. 4 Hard Drive Installation.................. 4 Connecting the Enclosure to a Computer ............7 Notes on Operating the Enclosure ............... -
Page 2: Introduction
SATA 3.5” HDD Enclosure User Manual Introduction Thank you for purchasing the 3.5” SATA HDD Enclosure Kit. This User’s Manual provides instructions on assembling and using the following products. • SATA to USB 2.0 3.5” HDD Enclosure Kit • SATA to eSATA/USB2.0 3.5” HDD Enclosure Kit •... -
Page 3: Getting Started
SATA 3.5” HDD Enclosure User Manual Getting Started The installation instructions in this manual apply to the following models. Please review the package contents for each model. SATA to USB2.0 3.5” HDD Enclosure Rear Panel Package Contents • Enclosure • USB A to mini B cable •... -
Page 4: System Requirements
SATA 3.5” HDD Enclosure User Manual System Requirements • 266MHz or faster CPU • 64MB of RAM • Microsoft Windows, 2000, XP, 2003 • One available eSATA, USB 2.0, FireWire or FireWire800 port (depending model) Macintosh • Macintosh PowerPC or Intel Core Duo processor •... - Page 5 SATA 3.5” HDD Enclosure User Manual SATA Hard Disk Gently push the HDD until the SATA connectors are seated. SATA Hard Disk Locate the screws included in the package. Ensure that the screw guides on the bottom of the HDD are aligned with the openings on the bottom of the drive tray.
- Page 6 SATA 3.5” HDD Enclosure User Manual Fasten the rear panel to the Enclosure housing by replacing the 2 screws removed in step 1. The Enclosure Kit is now assembled and ready for connection to a computer. Version 01 © 2006 All rights reserved.
-
Page 7: Connecting The Enclosure To A Computer
SATA 3.5” HDD Enclosure User Manual Connecting the Enclosure to a Computer Complete the following steps to connect the Enclosure to a host computer. Connect the AC/DC power adapter, then turn on the power and ensure the LED indicator is active. Insert the eSATA, USB 2.0 or FireWire 800 connector into the corresponding port. - Page 8 SATA 3.5” HDD Enclosure User Manual Connect the eSATA, USB 2.0, FireWire or FireWire 800 cable into an available port on the computer. Version 01 © 2006 All rights reserved.
-
Page 9: Notes On Operating The Enclosure
SATA 3.5” HDD Enclosure User Manual Notes on Operating the Enclosure 1) Any cable (eSATA, FireWire800, or USB 2.0) inserted before the enclosure is powered on has priority over the other cables and will be the primary connection method, i.e.: If the enclosure is connected via FireWire 800 before powering on the enclosure, data will be transferred via FireWire800. -
Page 10: Notices And Classifications
SATA 3.5” HDD Enclosure User Manual Notices and Classifications FCC-B Radio Frequency Interference Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the SATA to USB 2.0 3.5” HDD Enclosure Kit and is the answer not in the manual?
Questions and answers