Peakerphone And Handset; Intercom Operation; Aking An Nswering An; Call - GE 27958 User Manual

S B
WITCHING ETWEEN
You can switch between speakerphone and handset after dialing a number,
or any time during a conversation.
Speaker to Handset — Press TALK/callback on handset, or lift the corded
handset, and then press SPEAKER/CALLBACK on the base. Speak into the
handset.
Corded/Cordless Handset to Speaker — Press SPEAKER/CALLBACK, then
hang up the handset. Speak into the Speakerphone.
I O
NTERCOM PERATION
A two-way intercom is possible between the base and cordless handset
without tying up the telephone line and since the telephone line is not
used, you can still receive incoming calls.
M I
AKING AN NTERCOM
1. Make sure the phone is OFF (not in TALK mode).
2. Press the PAGE INTERCOM button (base) or the intercom button (cordless
handset). A paging tone sounds at the base and cordless handset.
3. When finished, press the PAGE INTERCOM button or the intercom button.
NOTE: To cancel the intercom call, press PAGE INTERCOM (base) or
intercom (cordless handset).
A
NSWERING AN
1. Press the PAGE INTERCOM button (base) or the intercom button
(handset).
2. When finished, press the PAGE INTERCOM or the intercom button again.
R I

ECEIVING AN

During an intercom call, if you receive a telephone call, both intercom
users are alerted as follows:
S
PEAKERPHONE AND
C
ALL
I C
NTERCOM ALL
T
NCOMING ELEPHONE
H
ANDSET
C D
ALL URING AN
I C
NTERCOM ALL
21