Telephone Set Up; Language - GE 27958 User Manual

4. Plug the telephone line cord into the jack marked PHONE LINE on the
back of the base and the other end into a modular phone jack.
5. Feed the telephone line cord and power supply cord through the
grooves on the pedestal to allow the unit to rest flat against the wall.
6. Slip the mounting holes on the pedestal over the wall plate posts and
firmly slide the unit into place. (Wall plate not included.)
7. Remove the handset hook, turn it upside down, and put it back in the
slot. You need to do this so the corded handset doesn't fall out of the
base.
8. Place the corded handset in the base cradle.
NOTE: If desired, gather the extra telephone line and power supply cord
together, fasten with a wire tie.
T
ELEPHONE
There are ten programmable menus available: Language, Tone/Pulse,
Ringer, Display Contrast, Local Area Code, Ringer Level, Set Day, Set Time,
Link Cordless Handset, and Default.
L
ANGUAGE
NOTE: This setting may be made with the base or the cordless handset.
1. Press the flash/program button until 1ENGLISH 2FRA 3ESP shows in the
display. 1ENGLISH is the default setting.
2. Press 1, 2, or 3 on the cordless handset or base touch-tone pad to enter
your selection, or press the MESSAGES/CID (
base or the cid/vol (
your selection.
3. Press flash/program again to store your selection.
S U
ET P
or ) buttons on the cordless handset to scroll to
or ) button on the
11