Frame (51) So The Treadmill Is More Stable. Do - Gold's Gym Trainer 890 User Manual

3. Identify the right Upright (77), which is marked
with a sticker. Have a second person hold the
right Upright near Base (83). Orient the right
Upright so that the bend in the plate is in the po-
sition shown.
See the inset drawing. Tie the wire tie in the
right Upright (77) securely around the end of the
Upright Wire (76). Then, pull the other end of
the wire tie until the Upright Wire is routed com-
pletely through the right Upright.
4. Attach the right Upright (77) to the Base (83)
with a 3/8" x 2 3/4" Patch Bolt (7), a 3/8" x 1"
Patch Bolt (8), and two 3/8" Star Washers (11);
do not fully tighten the Patch Bolts yet. Be
careful not to pinch the Upright Wire (76).
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the

Frame (51) so the treadmill is more stable. Do

not fully fold the Frame until the treadmill is
completely assembled.
Orient the left Upright (77) so that the bend in
the plate is in the position shown.
Attach the left Upright (77) to the Base (83) with
a 3/8" x 2 3/4" Patch Bolt (7), a 3/8" x 1" Patch
Bolt (8), and two 3/8" Star Washers (11); do not
fully tighten the Patch Bolts yet.
Attach a Wheel (91) to the indicated Extension
Leg (88) with a 3/8" x 2 3/4" Patch Bolt (7) and a
3/8" Nut (12). Do not overtighten the Nut; the
Wheel must turn freely.
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
3
76
Wire
Tie
77
76
Wire Tie
4
5
77
11
83
7
8
8
Plate
77
83
77
76
83
8
Plate
7
88
91
12
51
11
7