Christie LX501 User Manual / Technical Manual page 14

Command Control via the Network
Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (
NOTE • If data is transferred via wireless and wired LAN at the same
time, the projector may not be able to process the data correctly.
Connection
Turn off the projector and the computer.
1.
If you use wired LAN, connect the projector's LAN port to the computer's
2.
LAN port with a LAN cable. Use the cable that fulfills the specification shown
in figure. If you use wireless LAN, insert the USB wireless adapter into one of the
USB TYPE A ports of the projector.
Turn the computer on, and after the computer has started up turn the
3.
projector on.
LX501/LX601i User Manual-Technical Guide
18).
LAN
LAN cable (CAT-5 or greater)
USB wireless adapter
12
020-000503-01 Rev. 1 (03-2012)