Start-Up Options Menu; Normal Operation; Simulator - Humminbird Matrix 67 Operation Manual

Start-Up Options Menu

See the following paragraphs for more information about each of these choices.

Normal Operation

Use Normal operation for on the water operation with a transducer connected. In addition, your Matrix
Fishing System uses advanced transducer detection methods to determine if a transducer is connected.
If a functioning transducer is connected, Normal operation will be selected automatically at power up
and your Matrix Fishing System can be used on the water.
Exit Normal operation by powering your Matrix Fishing System off.
Simulator, Shown with Optional
WeatherSense
power up). Manually selecting Simulator from the Start-Up Options menu allows you to pre-configure your
Matrix Fishing System for on the water operation. Any menu changes you make will be saved for later use.
A message will appear on the display periodically to remind you that you are using the Simulator.
Exit the Simulator by powering your Matrix Fishing System off.
Start-Up Options Menu
Press the MENU key when the Title screen is displayed to
access the Start-Up Options menu.
Use the UP or DOWN 4-WAY Cursor keys to position the cursor,
then the RIGHT Cursor key to select one of the following
choices. If you wait too long, the system will default to
whichever menu mode happens to be highlighted:

Simulator

Use the Simulator to learn how to use your Matrix Fishing
System before taking your boat on the water. The Simulator is
a very powerful tool that simulates on the water operation,
providing a randomly-updated display. We recommend going
through this manual while using the Simulator, since all of the
menus function and affect the display the way they actually
do when in Normal operation.
NOTE:To get the full benefit of the Simulator, it is important to select
Simulator manually from the Start-Up Options menu as opposed to
letting the Matrix Fishing System enter Simulator automatically (as
TM Accessory
it will if a transducer is not connected and you do nothing during
• Normal
• Simulator
• System Status
• PC Connect (use with PC Connect Cable).
31